[2 PIN PROGRAMMING CABLE] For Retevis RT5R

Two way radio programming cable

Newest Version Support Windows 7 64 Bit

Works perfectly under Windows 7, Windows 8, and Windows 10.

K head 2 pin USB 2-way radio programming cable, compatible with most K head 2 pin two way radio.

• Worked as stated
• Easier and faster
• Connection fits snuggly
• Avoid the bundled software

Features

• Walkie talkies USB programming cable that using to connect your radio and PC then write the program setting and frequency of the walkie-talkie by PC
• The newest version supports Windows 7 Windows 8; not compatible with Linux; Not included frequency writing software
• Space of 2 pin 11mm; length 100cm; 2 pin standard diameter ear 3.5mm stereo of top pin; mic 2.5mm stereo of bottom pin
• Program for your hand held radio like Baofeng UV-5R; Retevis H777 and more; works great with chirp
• Before you order it; please double-check if your radio model in the compatible list

Applications Model

• RETEVIS: H-777/RT21/RT22/RT-5R/RT-5RV/H-777S/RT1/RT2/RT5/RT7/RT15/RT17/RT18/RT19/ RT23/RT26/RT27/RT28/RT43/RT46/RT50/RT67/RT68/RT80/RT81
• FIT KENWOOD: TH-F6/F6A/D7/D7A/D7AG/D7E/F7/F7E/G71/G71A, TH-G71E/K2/K2A/K2E/K2ET/21/21AT/21BT/22, TH-22A/22AT/22E/25/26/27/28/31AT/31BT/41AT/41BT, TH-42/42A/42AT/2E/45/46/47/48/55/75/77/G71, TH-205/-215/225/235/235A/235E/315/41, TK-208/220/240/240D/248/250/260/260G/270/270G/308, TK-360G/370/370G/372G/373G/320/340/340D/348/350, TK-378/378G/430/431/353/360, TK-2100/ 2102/2130/ 2160/3100/3101/3102/3107/ , TK-3118/3130/3131/3160 etc
• BAOFENG: UV-5R Series, BF-F8HP,UV-82 Series,UV-82C,UV-82H,BF-480/490/320/V6/520/530/999/888/666S/BF-888S and more
• FIT HYT: TC286 386 2685 3865 6685/TC 278 378 388
• FIT LINTON: LT-2288/3288/6288/5288/3188/2188/3260/2268/3268,/6288/6188/3288A

How to program?

1. Install the USB driver (install driver FIRST) and software to your computer. (The files are not compatible with MAC.)
2. Open the software, and use the programming cable to connect a radio with computer. First connect the radio to the programming cable, then plug the programming cable into the computer, and finally turn on the power of the radio.
3. Then click the Program and choose Read from Radio, all the settings will be shown on the screen, then you will be able to reset it as you like.
4. Click the Program, and choose Write Data to Radio will be Ok.
5. Remove the radio and connect other one, keep the radio power on.
6. Click the Program, and choose Write Data to Radio will be reprogrammed to the same settings with the first radio.

Firmware/ Software

USB_universal_Driver